Turning Waste Tires Into Usable Energy
Pioneer Industries Ltd is a leading eco-manufacturing supplier in Bangladesh, transforming end-of-life tires and rubber waste into high-calorific Pyrolysis Green Oil through advanced pyrolysis technology at our Dhaka facility. Founded in 2020, we turn industrial tire waste into a practical alternative energy resource that supports cleaner production, waste reduction, and a circular economy across local industries. Engineered for superior thermal performance, our recovered fuel delivers a calorific value of 10,400 ± 3% cal/g, with sulphur content up to 1%, ash content up to 0.05%, and water content up to 0.25%. B2B industrial buyers—including factories, boiler operators, steel workshops, glass units, power plants, and brick kilns—rely on Pioneer Green Oil to secure dependable burner efficiency while achieving potential savings based on reference comparison of 5–10% over heavy furnace oil and 25–30% over industrial diesel.
| Section Heading | Focus Sub-Topics |
| 1. Introduction to Pyrolysis Green Oil | Eco-Manufacturing & Scrap Tire Processing in Bangladesh
Sustainable Alternative Fuel for Industrial Operations |
| 2. Technical Specifications of Pyrolysis Green Oil | High Calorific Value Performance (10,400 ± 3% cal/g)
Low Sulphur (up to 1%) and Low Ash (up to 0.05%) Content |
| 3. Key Industrial Applications of Pyrolysis Green Oil | Heavy Boilers, Power Plants, and Glass Units
Steel Workshops, Brick Kilns, and Hot Mix Plants |
| 4. Potential Cost Savings Using Pyrolysis Green Oil | 5–10% Potential Savings Compared to Furnace Oil
25–30% Potential Savings Compared to Diesel Oil |
| 5. Environmental Benefits of Pyrolysis Green Oil | Landfill Waste Reduction & Resource Recovery
Supporting Circular Manufacturing in Dhaka |
| 6. Ordering Bulk Pyrolysis Green Oil | B2B Delivery, Testing Samples & Quote Requests
Pioneer Industries Contact Information |
Dynamic Green Oil Specification
| PRODUCT SPECIFICATION | |||
|---|---|---|---|
| PROPERTY | UNIT | TYPICAL VALUE | METHOD |
| pH | — | 6.7 | ASTM D3838 |
| Nitrogen Surface Area | m²/g | 55 | ASTM D3663 |
| Ash Content | wt% | 7.4 | ASTM D2866 |
| Pour Density (Pellets) | g/cm³ | 0.65 | ASTM D2854 |
| Silica Form | wt% | 7.58 | ASTM D6854 |
| Sulphur | wt% | <1.59 | ASTM D1619A |
| Grit (Mesh 35, Wet Sieve) | ppm | 0 | ASTM D1514 |
| Grit (Mesh 100, Wet Sieve) | ppm | 8 | ASTM D1514 |
| Grit (Mesh 325, Wet Sieve) | ppm | 998 | ASTM D1514 |
| Volatility (1450 °C) | wt% | 4.49 | ASTM D3175 |
| Iodine Number | mg/g | 149 | ASTM D1510 |
| Photometer | min | 87 | ASTM D1618 |
| DBP | cc/100g | 102 | ASTM D2414 |
| Heating Loss (125 °C) | % | <1 | ASTM D1509 |
Application of Dynamic Green Oil
Major advantages of Dynamic Pyrolysis Oil
High Calorific Value
Calorific value of approximately 10,400 Cal/gm, providing strong energy potential for suitable industrial thermal applications.
Lower Sulfur Content
Sulfur content of up to 0.9%, compared with approximately 4% stated for furnace oil in the reference comparison.
Low Ash Content
Low ash content supports cleaner fuel handling and suitable industrial fuel applications.
Low Water Content
Low water content helps maintain the usable energy characteristics of the recovered fuel.
Potential Saving vs. Furnace Oil
The reference comparison reports approximately 5–10% potential savings compared with furnace oil.
Potential Saving vs. Diesel
The reference comparison reports potential savings of approximately 25–30% compared with diesel oil.
Comparison with Other Fuel Oil
| GREEN OIL PRODUCT COMPARISON | ||||||
|---|---|---|---|---|---|---|
| S.NO | TEST PARAMETERS | METHOD | UNIT | PIONEER GREEN OIL | FURNACE OIL | DIESEL OIL |
| 1 | Density at 15°C | ASTM D1298 | G/CC | 0.87–0.93 | 0.88–0.98 | 0.85–0.87 |
| 2 | API Gravity | ASTM D1298 | — | 25.40 | 13.05 | 27.54 |
| 3 | Viscosity at 100°C | ASTM D2161 | SUS | 29 | 65 | 42 |
| 4 | Sulphur Total, % Wt. | ASTM D129 | % Wt | Up to 1 | Up to 4 | Up to 1.8 |
| 5 | Water Content, % Vol. | ASTM D95-05 | % Vol | Up to 0.25 | Up to 1.0 | Up to 0.25 |
| 6 | Ash | ASTM D482 | % Wt | Up to 0.05 | Up to 0.1 | Up to 0.02 |
| 7 | Calorific Value | Bomb Calorimeter | Cal/g | 10400 ± 3% | 10000+ | 10600 |
| 8 | Color / Appearance | ASTM D1500 | — | Dark/Black | — | — |